| Parameter |
Specification |
| Temperature Range (Low to High) |
–70 °C to +180 °C (vendor to confirm) |
| Humidity Range |
10% RH to 98% RH (if climatic version) |
| Temperature Accuracy / Deviation |
±1.0 °C (typical; vendor to confirm) |
| Temperature Uniformity |
±1.0 °C (typical; vendor to confirm) |
| Temperature Stability / Fluctuation |
±0.5 °C (typical; vendor to confirm) |
| Heating Rate |
1 °C/min to 20 °C/min (application dependent) |
| Cooling Rate |
1 °C/min to 20 °C/min (application dependent) |
| Chamber Volume |
Custom as per requirement (e.g., 100 L – 1000 L or walk-in) |
| Construction – Inner Chamber |
Stainless Steel (SS-304) |
| Construction – Outer Body |
Powder coated mild steel |
| Insulation |
High-density polyurethane foam (or equivalent) |
| Door Type |
Single door with silicone gasket + viewing window |
| Controller |
PLC / Microprocessor based, programmable profile, with custom “Kelsoft” software option |
| Sensors |
RTD (Pt-100) for temperature; humidity sensor if applicable |
| Cooling System |
Air-cooled or water-cooled refrigeration system (cascade type for very low temps) |
| Heating System |
Stainless steel tubular heaters with PID control |
| Data Logging |
USB / Ethernet / SD card interface (vendor to confirm) |
| Safety Features |
Over-temperature protection, compressor overload protection, low refrigerant alarm, emergency stop, power failure recovery |
| Power Supply |
415 V ±10%, 50 Hz, 3-phase AC (typical for India) |
| Optional Features |
Humidity control, walk-in size, remote monito |
Reviews
There are no reviews yet.